Hebei Guanghao Pipe Fittings Co., Ltd. introduced the Hebei Tee Factory . The hydraulic bulging process of Tee is to separate the compressor, motor, cylinder and other components, and then transfer them to the liquid level through a fixed pressure to make it comparable to the main pipe. connect. This method is because the oil cylinder is connected to the main pipe, so as to realize the automatic control of oil and gas. After adding fixed compressed air above the liquid level, the oil pump, valve, water pump and other components can start to operate. Since the three-way forming process can compress the metal material in the axial direction, it can reduce the reaction of the metal material to pressure to a fixed degree. However, because the branch pipe formed by hydraulic expansion has its own fixedness and stability, its compression range cannot be completely compared with that of liquid substances. Therefore, the manufacturing process of the liquid crystal display requires a higher level of technology.
In Hebei Tee Factory , the design of tee pipe fittings and joints should be considered to be connected to the main pipeline. In the process of tee management, the following aspects should be paid attention to. 1. The joints of the main pipeline must be three-way and relatively stable. Connection. In the design of pipe joints, the three-way connection should be considered, and it should be coordinated with the connection of the main pipeline. Second, it should be considered whether the joint of the main pipeline has the functions of preventing leakage, obstructing power supply and preventing explosion. The main function of the three-way pipe fitting is to support the support bracket, which is used to support the normal operation of the support bracket, while ensuring its endurance and stability. The three-way pipe fittings can be used for installation, debugging or modification. The main function of the three-way main pipe fittings is to install, debug and use, while ensuring its endurance and stability. There are many ways to install pipe fittings on the pipeline.
The three-way pipe joints are made of steel, aluminum, copper, zinc, etc. The three-way steel joint is used to change the direction of the fluid, and is used to change the direction of the fluid. The three-way aluminum joint is used to change the direction of the fluid, and is used at the branch pipe of the main pipeline. The three-way copper joint is used to change the direction of the fluid to enhance the seismic capacity of the main pipeline. The three-way pipe is connected by a pipe whose diameter is larger than the diameter of the fluid; and the branch pipe must be treated to avoid pollution. We use this method for branch pipe processing, which can reduce the environmental impact of harmful substances in the fluid. We took these factors into consideration when we designed, mainly using three-way technology.
The elbow tee is customized . The characteristic of the tee is that the branch pipe is expanded by the axial compensation of the metal material, so that after the hydraulic valve is deformed, there will be no compression deformation. Among the three-way metal materials, there are two main forming processes for the axial compensation of the metal material to expand the branch pipe. One is to adjust the hydraulic bulging of other parts to make it contact with the liquid surface; the other is to Adjust other parts. On the basis of the three-way hydraulic bulging process, a new type of liquid compression forming process is adopted to make the forming power of the liquid compression reach more than 80%. In the production process, control can be achieved by adjusting the size and oil volume of the oil cylinder. This technology is a high-tech product with high efficiency, energy saving and low cost. At present, several domestic companies have produced this technology.
The price of the three-way pipe fittings . Because the three-way hydraulic bulging process fixes or moves the valve inside the valve body, the design and manufacturing methods of the valve body and some valves are different from the traditional methods. The hydraulic bulging process of the three-way is a kind of high-efficiency, simple and reliable lubricant. In the hydraulic bulging process, the hydraulic bulging process of the three-way is more important. Tee fittings or tee fittings refer to various cables connected to main pipelines, branch lines, and power transmission equipment. Mainly used to change the direction of the fluid, used to change the direction of the fluid, mainly used on the main pipeline to be divided into the bracket, used to change the direction of the fluid, as well as cables and other supporting facilities and equipment. The main pipe is a special product, it does not need to be specially designed and manufactured like ordinary industrial products.